If you’re looking for powder coating in Carmichael, the finish starts long before the powder ever goes on. At Powder Craft, we help customers restore worn metal, change up the appearance, or protect a specific part from future wear and tear. Some of our most popular projects include automotive parts, patio furniture, railings, metal décor, equipment, and fabricated pieces.
The powder coating itself is only part of the job. What happens to the metal before coating has a major impact on the finished surface. Here’s what to know about our in-house process and if powder coating is the right choice for you.
What Happens Before Powder Coating?
Powder Craft has spent decades refining our craft, including a thorough prep process. We have the only pyrolytic cleaning oven in Northern California that helps create a smooth, clean surface. Our prep process includes:
- Decontamination: Old coatings, grease, oil, dirt, and other stubborn contaminants need to come off before new material goes on.
- Pyrolytic cleaning: Powder Craft uses a burn-off oven that turns difficult coatings and contaminants into ash without damaging the underlying metal.
- Media blasting: Removes remaining coating, rust, mill scale, and surface imperfections while creating the appropriate surface profile for adhesion.
- Multi-stage washing: Cleans the part again after blasting.
- Drying and outgassing: Parts are heated so trapped contaminants or gases don’t interfere with the coating later.
Porous metals can also hold contaminants below the visible surface. That’s why a part can look clean and still need outgassing before coating. If you skip the prep process, you could end up with a coating with poor adhesion, bubbles, imperfections, or premature coating failure.
Can Every Metal Part Be Powder Coated?
Powder coating needs oven curing to create a durable surface, but not every item is a good candidate. Parts containing rubber, plastic, sealed bearings, fiberglass, or other heat-sensitive components may need to be disassembled. Older, vulnerable antiques usually aren’t a good fit for powder coating. We safely remove old contaminants, grease, rust, and more during the prep process. Curing temperatures reach roughly 375–400°F, depending on the application.
How Is Powder Coating Applied After the Metal Is Prepped?
Once the prep work is complete, we get to work on the coating process with an epoxy powder primer. It helps add corrosion resistance to create a solid foundation for the topcoat. Our coatings are electrostatically applied so they cling evenly to the metal. The piece is cured in a specialized oven to allow the powder to form the finished coating. With over 5,000 available colors, textures, and finishes to choose from, we can help create the look you want with the protection your metal items need.
Powder Coating FAQs
1. How much does powder coating cost in Carmichael, CA?
The cost of powder coating depends on the size of the part, its condition, the amount of prep work needed, and the color or finish you want. Our team at Powder Craft can provide a more accurate estimate after reviewing photos and details about your project.
2. What types of metal can be powder coated?
Powder coating works on many types of metal, including steel, aluminum, and cast metal. Because the coating needs to cure at high temperatures, not all parts are suitable for powder coating. We may need to disassemble parts that have plastic, rubber, bearings, or other heat-sensitive components.
3. Do you have to remove rust before powder coating?
Yes, rust, old paint, grease, and other contaminants need to be removed so the powder can properly bond to the metal. Professional preparation includes media blasting, cleaning, and outgassing before the coating is applied.
4. How long does powder coating last outdoors?
When the surface is thoroughly prepared and the powder coating is properly applied, it can last for years outdoors. Its lifespan depends on the metal, exposure to sun and weather, the coating system used, and how much wear the item receives.
5. Where can I get powder coating near Carmichael, CA?
Our team at Powder Craft provides powder coating for customers in Carmichael and throughout the Sacramento area from our Rocklin shop. You can submit photos and project details to get started with a quote before bringing your parts in.
Get Carmichael Powder Coating From Powder Craft
If you’re in Carmichael and have a metal piece that’s rusty, chipped, faded, or just needs a new finish, we can help. Our team at Powder Craft cleans, blasts, and outgasses your items when needed. We make sure your item is properly primed and the coating comes out smooth and ready to hold up against the elements. Not sure what your project needs? Send Powder Craft a photo and a few details to get a quote for powder coating near Carmichael, CA.
